WW-PS

Pump Station Wet Well Level and Pressure

Wet well level control and rising main pressure for sewage pump stations, where foam and grease blind a non-contact sensor.

Category
Pump Stations
Standard lead time
7 working days for standard models; explosion-proof versions 15 working days.
Package
5 recommended instruments

The problem at this measuring point

Foam builds on the surface and the ultrasonic echo never returns; grease coats the horn within weeks. Float switches foul and stick, so the station either short-cycles the pumps or runs them dry. Nobody notices until a call-out at night.

How we choose the principle

If the process is Use this principle
Vented wet well, moderate foam, easy access to the top Ultrasonic level meter with a stilling well or a guided bracket
Heavy foam, grease or condensation 80 GHz radar, non-contact and unaffected by vapour
Narrow or deep sump with obstructions Guided wave radar on a cable probe
Overflow protection independent of the level meter A second, separate level switch as a hard interlock

Scope of supply

Aumeascon supplies the level instrument, the mounting bracket and the pressure transmitter for the rising main. The site provides the pump controller logic, the power supply and the alarm wiring. Pump control panels and VFDs are outside the supply.

<!– wp:paragraph –>
<p>A wet well is judged by two numbers: the level the pumps start at and the level they must never reach. Foam, grease and a swinging float are the usual reasons a station short-cycles its pumps.</p>
<!– /wp:paragraph –>

Tell us the measurement point

Medium, pipe or tank size, the output your control system expects — we reply with the principle and the model.