Application packages
Applications
Each package is one measurement problem at a real measuring point — a channel with no flume, a wet well that foams, a pipe with no straight run — and the measurement principle that solves it, with the instruments that carry it.
Water Distribution District Metering
District metering and pressure management for distribution networks, where night flow and peak demand differ by an order of magnitude.
Sludge Transfer and Blanket Level
Sludge transfer flow and blanket level in settling tanks, where coating and low velocity defeat clean-liquid instruments.
Industrial Process Measurement
Flow, level and water quality in chemical, food and pharmaceutical processes, where wetted materials and signal compatibility decide the choice.
Pump Station Wet Well Level and Pressure
Wet well level control and rising main pressure for sewage pump stations, where foam and grease blind a non-contact sensor.
Municipal Wastewater Inlet Flow Measurement
Inlet and outlet flow in raw sewage, where solids, gas entrainment and short straight runs defeat clean-liquid meters.
Open Channel and Outfall Discharge
Discharge and outfall flow for permit reporting, including channels that were never built to a standard drawing.
Content plan — package library
- Case study per package: one commissioned site for each package, describing the process, the principle chosen and what the readings showed after commissioning.
- Typical project photographs: one site photograph per package, so the grid shows where each instrument is actually installed instead of being text only.
- A selection matrix: process condition against measurement principle in one table, each cell linking to the package that covers it.