Products
The whole catalogue, grouped by measurement principle. Open a model for its specifications, its limits and its downloads.
Start from the condition, not the model
What the instrument has to cope with decides which principle will read correctly. Pick the line that describes your measuring point and the catalogue narrows itself.
- Conductive liquid — water, wastewater, slurry — in a pipe that runs full Electromagnetic
- A liquid carrying solids or bubbles: sludge, slurry, raw sewage Doppler
- A full pipe you cannot cut or shut down: steel, stainless, copper, PVC, PPR Clamp-on Ultrasonic
- A clean, low-viscosity liquid that lubricates: water, fuel, solvents Turbine
- An open channel: a flume, a weir, or a channel with its own head-flow table Open Channel
- A tank, sump, river or silo to measure rather than a pipe Level Measurement
- Pressure in a line or a vessel, or level read from hydrostatic head Pressure
- Water quality: conductivity, ions, or an online analyser on the outlet Water Quality
AM-CON
AM-CON Inductive Conductivity Sensor
Inductive conductivity sensor for aggressive, scaling or fouling liquids, with no electrodes in contact with the medium.
AM-D-PH
AM-D-PH Digital pH Sensor
Digital online pH sensor for continuous monitoring in wastewater and process water, with Modbus output and a replaceable electrode.
AM-DFM
AM-DFM Doppler Flow Meter
Doppler ultrasonic flow meter for sludge, slurry and raw wastewater where the liquid carries enough solids or bubbles to reflect the signal.
AM-IOT-ION
AM-IOT-ION Digital Ion Sensor
Digital ion-selective sensor for continuous ammonia nitrogen and other ion measurement, with a replaceable membrane and a refillable reference.
AM-LTF
AM-LTF Liquid Turbine Flow Meter
Liquid turbine flow meter for clean, low-viscosity liquids, with a wide turndown and a pulse output for batch control.
AM-MFM
AM-MFM Electromagnetic Flow Meter
Obstructionless electromagnetic flow meter for conductive liquids and two-phase slurries, DN6–DN2600, with five liners and seven electrode materials.
AM-OCFM
AM-OCFM Open Channel Flow Meter
Open channel flow meter for flumes, weirs and non-standard channels, with the site's own head-flow table entered directly.
AM-P100
AM-P100 Pressure Sensor
Industrial pressure transmitter for pump station pipework and process lines, with a stainless diaphragm and a 4-20 mA HART output.
AM-P104
AM-P104 Digital Pressure Controller
Digital pressure controller for pump start-stop and alarm logic, with two relays and a retransmitted 4-20 mA signal.
AM-P200
AM-P200 Submersible Level Transmitter
Submersible hydrostatic level transmitter for wet wells, tanks and reservoirs, with a vented cable and a diaphragm protected against rags.
AM-RM
AM-RM 80 GHz Radar Level Meter
80 GHz radar level transmitter for foam, steam, dust and pressurised tanks, with a beam narrow enough to fit a small nozzle.
AM-ULF-W
AM-ULF-W Wall Mounted Ultrasonic Flow Meter
Wall-mounted clamp-on ultrasonic flow meter for existing pipes, installed without cutting the line or stopping the process.
AM-ULM
AM-ULM Ultrasonic Level Meter
Non-contact ultrasonic level meter for open tanks, sumps and channels, with a small blind zone and a Modbus output.
AM-USM
AM-USM Ultrasonic Sludge Level Meter
Ultrasonic sludge blanket and interface meter for settling tanks, measuring the sludge line and the clear-water interface from a fixed top mount.
Content plan — catalogue filters
- Range filter: nominal size or measuring range, so a visitor can rule out models that do not fit the pipe.
- Principle filter: electromagnetic, ultrasonic, Doppler, thermal, radar, hydrostatic — the choice an engineer makes first.
- Output filter: 4–20 mA, pulse, Modbus RTU/TCP, HART, MQTT, for the control system already installed.
- Planned as a filter–sort behaviour over the same product query, with the chosen filters in the URL.