Application packages
Applications
Each package is one measurement problem at a real measuring point — a channel with no flume, a wet well that foams, a pipe with no straight run — and the measurement principle that solves it, with the instruments that carry it.
Water Distribution District Metering
District metering and pressure management for water distribution, where the same meter must be accurate at night flow and at peak.
Sludge Transfer and Blanket Level
Sludge transfer flow and blanket level in settling tanks, where coating and low velocity defeat clean-liquid meters.
Industrial Process Measurement
Flow, level and water quality in chemical, food and pharmaceutical processes, where the wetted material and the signal decide the choice.
Pump Station Wet Well Level and Pressure
Wet well level and rising main pressure for pump stations, with the foam and grease that blind a non-contact sensor.
Municipal Wastewater Inlet Flow Measurement
Flow measurement at municipal wastewater inlets, where solids, gas and a short straight run rule out most meters.
Open Channel and Outfall Discharge
Discharge flow for permits, including channels with no standard flume or weir and sites with their own head-flow table.
Content plan — package library
- Case study per package: one commissioned site for each package, describing the process, the principle chosen and what the readings showed after commissioning.
- Typical project photographs: one site photograph per package, so the grid shows where each instrument is actually installed instead of being text only.
- A selection matrix: process condition against measurement principle in one table, each cell linking to the package that covers it.