Sludge / Interface
AM-USM Ultrasonic Sludge Level Meter
Ultrasonic sludge blanket and interface meter for settling tanks, measuring the sludge line and the clear-water interface from a fixed top mount.
- Model
- AM-USM
- Category
- Sludge / Interface
- Outputs
- 4–20 mA, Modbus RTU
- Lead time
- 7 working days; an on-site commissioning check adds 3 working days
- MOQ
- 1 unit
- OEM available
- Yes
Technical specifications
| Measurement | Sludge blanket level and interface, 0.3–10 m |
|---|---|
| Principle | Dual-frequency ultrasonic, fixed-top installation |
| Accuracy | ±1% of range in stable sludge |
| Outputs | Two 4-20 mA channels, RS485 Modbus, relay per threshold |
| Protection | IP68 probe, IP65 controller |
| Installation | Fixed mount on the tank bridge or a handrail bracket |
What it is not the answer for
Read this before asking for a price: one of these conditions is what turns a good meter into a bad installation.
- Thin, well-mixed sludge where no clear interface exists to measure
- Tanks with mechanical scrapers passing within the probe's measurement path
- Very deep tanks beyond the stated range
Maintenance and service life
Clean the probe monthly in heavy sludge service. Re-run the blanket calibration after any change to the sludge draw-off schedule, because the profile, not the instrument, has usually changed. The probe has no moving parts.
Applications
Where this model is used
Each application names a measuring point and the conditions that decide the selection.
Elsewhere in the range
Other models in Level Measurement
The same category holds the models that solve the neighbouring problem, and the price difference is usually smaller than the cost of the wrong principle.
AM-P200
AM-P200 Submersible Level Transmitter
Submersible hydrostatic level transmitter for wet wells, tanks and reservoirs, with a vented cable and a diaphragm protected against rags.
AM-RM
AM-RM 80 GHz Radar Level Meter
80 GHz radar level transmitter for foam, steam, dust and pressurised tanks, with a beam narrow enough to fit a small nozzle.
AM-ULM
AM-ULM Ultrasonic Level Meter
Non-contact ultrasonic level meter for open tanks, sumps and channels, with a small blind zone and a Modbus output.
Content plan — certificates and case references
- The declarations that apply to this model: CE, RoHS and any hazardous-area approval, each with its certificate number and the body that issued it.
- One or two installations: plant type, medium, model supplied and what the reading is used for. Customer name only where written permission exists.
Measuring point does not match the table above?
Send the medium, the pipe size and the output your control system expects. We answer with the principle that fits, or with the reason none of ours does.