Clamp-on Ultrasonic
AM-ULF-W Wall Mounted Ultrasonic Flow Meter
Wall-mounted clamp-on ultrasonic flow meter for existing pipes, installed without cutting the line or stopping the process.
- Model
- AM-ULF-W
- Category
- Clamp-on Ultrasonic
- Outputs
- 4–20 mA, Pulse, Modbus RTU
- Lead time
- 7 working days including the pipe survey review
- MOQ
- 1 unit; 10 pcs for OEM branding
- OEM available
- Yes
Technical specifications
| Pipe size | DN15–DN6000, outside diameter 20–6000 mm |
|---|---|
| Accuracy | ±1.0% of reading with on-site calibration; ±2.0% typical |
| Velocity range | 0.03–12 m/s, bidirectional |
| Pipe material | Carbon steel, stainless, copper, PVC, PPR, PVDF |
| Protection and power | IP65 transmitter, IP68 transducers; 24 V DC or 220 V AC |
| Data logging | Built-in logger, 60 000 records, export by SD card |
What it is not the answer for
Read this before asking for a price: one of these conditions is what turns a good meter into a bad installation.
- Concrete, cast iron with heavy scale, or lined pipes that do not transmit ultrasound
- Liquids carrying heavy solids or gas slugs that break the acoustic path
- Pipes with less than 5 diameters of straight run upstream, unless a correction is accepted
Maintenance and service life
Clean the transducer faces and renew couplant every 12 months, or sooner on hot pipes. Check the signal strength and the gain after any pipework change upstream. No wetted parts, so no cleaning-in-place cycle is needed.
Behind the instrument
How it is built and tested
Coil winding, the calibration bench, the plant floor — and an overseas customer's factory audit.
Applications
Where this model is used
Each application names a measuring point and the conditions that decide the selection.
WW-FL
Municipal Wastewater Inlet Flow Measurement
Inlet and outlet flow in raw sewage, where solids, gas entrainment and short straight runs defeat clean-liquid meters.
WW-IP
Industrial Process Measurement
Flow, level and water quality in chemical, food and pharmaceutical processes, where wetted materials and signal compatibility decide the choice.
WW-WD
Water Distribution District Metering
District metering and pressure management for distribution networks, where night flow and peak demand differ by an order of magnitude.
Measuring point does not match the table above?
Send the medium, the pipe size and the output your control system expects. We answer with the principle that fits, or with the reason none of ours does.